1.28 Mower Maintenance - Engine; Throttle Cable Adjustment; Carburettor Adjustments - Hayter Harier 56 340A Owner's Handbook Manual

To prevent accidents stop the engine and disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
1. Engine Cowl
2. Spark Plug / Lead
3. Carburetor
4. Exhaust Guard
5. Exhaust
6. Oil fill/Dipstick
7. Start Grip
8. Fuel Cap
9. Finger Guard
10. Air Cleaner

Throttle Cable Adjustment

Loosen casing clamp screw (1) and move the governor lever (2) in the
direction of screw (1) as far as posible. Move the throttle control to the
choke position. Tighten casing clamp screw.

Carburettor Adjustments

Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
MOWER MAINTENANCE
Engine
8
9
10
2
3
1
2
7
6
1
4
5
1.21