1.31 Mower Maintenance - Engine; Throttle Cable Adjustment; Carburettor Adjustments - Hayter Harrier 56 560F Owner's Handbook Manual

111-1471 (C) 29/8/08
To prevent accidents stop the engine and disconnect the spark
plug lead before attempting to carry out maintenance proce-
dures on the mower.
1. Air Cleaner
2. Spark Plug / Lead
3. Carburetor
4. Exhaust Guard
5. Exhaust
6. Oil fill/Dipstick
7. Start Grip
8. Fuel Cap
9. Cover

Throttle Cable Adjustment

Loosen casing clamp screw (1) and move the governor lever (2) in
the direction of screw (1) as far as possible. Move the throttle con-
trol to the choke position. Tighten casing clamp screw.
Should only be made by an authorised Briggs & Stratton dealer.
Under no circumstances should the engine be adjusted to run at a
speed in excess of that shown on the Declaration of Conformity.
12:56 pm Page 1.23
MOWER

Carburettor Adjustments

MAINTENANCE
Engine
8 7
9
1
2
3
1
2
6
4
5
1.23