Before Starting The Mower; Prevent Engine Damage; Oil Type; Check Oil Level - Hayter Harrier 48 PRO Owner's Handbook Manual

Hide thumbs Also See for Harrier 48 PRO:
Table of Contents

Advertisement

111-1275 (A)
17/5/07
BEFORE
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Always use high quality detergent oil classified SAE 30 oil. Never use
additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to 'Maintenance Schedule'.
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton ser-
vice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
9:02 am
Page 1.13

STARTING

Prevent Engine Damage

Check Oil Level

THE
MOWER

Oil Type

0.15
Litres
G480V15C

Fuel Type

1.13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents