Activating The Crewtalk Dialog And Towercom Announcements In The Command Control Environment - Lionel legacy super bass AC6000 Owner's Manual

LEGACY RailSounds sound system operations
Activating the CrewTalk dialog and TowerCom announcements in
the Command Control environment
W
ith the LEGACY RailSounds sound system, CrewTalk dialog and TowerCom
announcements feature a variety of brief radio conversations between the engineer and
dispatcher. All dialog is intelligible, and each comment is followed by at least one automatic
response.
CrewTalk dialog is an engineer-initiated radio conversation with the dispatcher. TowerCom
announcements are a dispatcher-initiated radio conversation with the engineer. Be sure to listen
for the different combinations of words and phrases that comprise these exchanges.
Refer to Table 1 below for the dialog commands. The dialog in the table provides examples
of the conversations you can trigger. The actual phrasing will vary.
The CrewTalk dialog and TowerCom announcements occur only when the
Note!
locomotive is stopped
Locomotive
Stopped
Table 1. CAB-1 Remote Controller dialog commands
72-8305-250_NP_AC6000_2.indd 27
Commands Example dialog
AUX1, 2 Crew: Can we go?
Tower: No, please standby
AUX1, 7 Tower: Stand by for clearance.
Crew: Roger.
2 Crew: Can we go?
Tower: Roger, you are clear.
7 Tower: You are clear for departure.
Crew: Roger, we are clear.
AUX1, 5 Crew: Signing off!
Shutdown sequence
27
2/27/09 10:15 AM