Legacy Railsounds Sound System Operations - Lionel legacy super bass AC6000 Owner's Manual

LEGACY RailSounds sound system operations

LEGACY RailSounds sound system operations
Couple your non-powered locomotive to a powered locomotive to experience all of the
Note!
features of the LEGACY RailSounds sound system
Y
our non-powered locomotive is equipped with the Lionel LEGACY RailSounds sound system,
the most realistic model railroad sound system in the world. The LEGACY RailSounds sound
system brings the sounds of the railroad to your layout through high quality sound recordings of real
locomotives.
When you operate your non-powered locomotive in the conventional environment, you get the
realistic sounds of the diesel motor, which automatically revs up as the speed of the locomotive
increases. You can sound the locomotive's horn or activate the ringing of the mechanical bell.
CrewTalk dialog and TowerCom announcements are triggered with the horn button on your
controller. When you are through with operations and power down the track, your locomotive's
LEGACY RailSounds sound system starts a realistic shutdown sequence (a nine-volt alkaline battery is
required, see Figure 3 on page 22).
When you operate your non-powered locomotive in the TrainMaster Command Control
environment, you get full control of the LEGACY RailSounds sound system. In addition to the horn
and bell sounds, the locomotive's RPM sounds automatically rev up, and you can also set a particular
RPM level using your CAB-1 Remote Controller. In the Command Control environment, the release of
the ElectroCouplers is accompanied by a coupler release sound. Use the BRAKE button, and listen for
the sound of squealing brakes. You can also trigger CrewTalk dialog and TowerCom announcements,
which simulate the interaction between the locomotive crew and the dispatcher. Whenever you choose
to shutdown your non-powered locomotive, the realistic shutdown sequence commences. A nine-volt
alkaline battery is required for the shudown sequence, if track power is turned off. Refer to Figure 3
on page 22.
Operating your non-powered locomotive with the LEGACY Control system provides you control of
all the features mentioned above as well as access to the new quilling horn and single hit bell
sounds.
72-8305-250_NP_AC6000_2.indd 21
21
2/27/09 10:15 AM