TrainMaster Command Control operations
CAB-1 numeric keypad table
T
he 3, 5, and 6 keys on your CAB-1 can perform several different functions when
controlling your non-powered locomotive. These functions include:
• Starting up and shutting down the engine sounds.
• Controlling the engine RPM sounds manually ("Manual RPM Mode").
The following table summarizes the functions of these CAB-1 Remote Controller buttons
for your locomotive.
Key Command
3
AUX1, 3
5
AUX1, 5
6
AUX1, 6
72-8305-250_NP_AC6000_2.indd 13
LEGACY RailSounds sound system
If the LEGACY RailSounds sound system is shut down, engine sounds start up.
If the LEGACY RailSounds sound system is running, engine enters manual RPM
mode and revs up RPM one level with each press.
(same as above)
If locomotive is stopped, engineer announces "shut down," engine sounds turn
off. If the locomotive is moving, the dispatcher instructs, "Go to restricted speed."
(same as above)
If the locomotive is moving, engine enters manual RPM mode and revs
down RPM one level with each press.
(same as above)
13
2/27/09 10:15 AM