Neve 4081 User Manual page 10

4081 User Manual Issue 1
Click Install.
The software will start to install.
Click Finish.
(If you wish to launch the programme at this point, click Launch Mic Line
Control before clicking Finish).
Standalone Control Setup - PC
The software is launched from Windows Start Menu / Programs / Mic Line
Control / Mic Line Control.
The control program automatically detects the presence of connected
racks and the screen will be updated with any changes made through the
modules' front panels.
The Gain can be set by clicking on the Gian knob and rotating it to the
desired position.
The Phantom, Pad, Phase, Impedance, Mic/Line selection and Insert can
all be set by clicking on the appropriate button on-screen.
The icons at the bottom of the screen indicate how many remote racks are
connected.
The rack indicated by the red outline is the one currently controlled from
(and displayed on) the upper part of the screen.
To select another rack, click on it's icon and the red outline will move to
indicate that the screen is now displaying parameters for that rack.
The Mic amp settings can be saved and recalled independently using the
Store Preset and Load Preset buttons that launch conventional
Windows Save and Load dialogues.
These Stores will save the control settings of all the attached racks, not
just for the currently displayed rack.
- 10 -