Yealink SIP-T41P User Manual page 91

To configure auto answer via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Press
ID field.
3. Press
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable auto redial to automatically redial a phone number when the called
party is busy. You can also configure the number of auto redial attempts and the time to
wait between redial attempts.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press
field.
3. Enter the desired time (in seconds) in the Redial Interval field.
The default value is "10".
4. Enter the desired number of redial attempts in the Redial Times field.
The default value is "10".
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General
Information.
or , or the Switch soft key to select the desired account from the Line
or , or the Switch soft key to select Enabled from the Status field.
or , or the Switch soft key to select Enabled from the Auto Redial
Basic Call Features
79