Yealink SIP-T41P User Manual page 156

User Guide for the SIP-T41P IP Phone
4. Press the OK soft key to delete this message or the Cancel soft key to cancel.
You can also delete all text messages
Delete All. For more information, refer to the above steps.
Note
You can also delete a specific message after retrieving by pressing the Delete soft key.
You can leave voice mails for someone else using the SIP-T41P IP phone. You can also
listen to voice mails that are stored in a voice mailbox. When receiving a new voice mail,
the phone will play a warning tone. The power indicator LED will slow flash red, and the
LCD screen will prompt "n New Voice Mail(s)" ("n" indicates the number of unread voice
messages, e.g., 4 New Voice Mail(s)) and a flashing icon
If the voice mail pop-up message box disappears, it won't pop up again unless the user
receives a new voice mail or the user re-registers the account that has unread voice
mail(s).
Voice mail is not available on all servers.
Note
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *88).
144
by pressing the Delete soft key and then select
.