Yealink SIP-T41P User Manual page 165

To enable SRTP on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value (Optional or Compulsory) from the pull-down list of RTP
Encryption(SRTP).
4. Click Confirm to accept the change.
SRTP is not available on all servers. Contact your system administrator for more
Note
information.
SRTP is configurable via web user interface only.
How to export PCAP trace?
We may need you to provide a PCAP trace to help analyze your problem.
To export a PCAP trace via web user interface:
1. Click on Settings->Configuration.
2. Click Start to begin capturing signal traffic.
3. Recreate the error to be documented in the trace.
4. Click Stop to stop the capture.
Troubleshooting
153