Yealink SIP-T41P User Manual page 100

User Guide for the SIP-T41P IP Phone
3. Click Confirm to accept the change.
Note
Call forward mode is configurable via web user interface only.
To enable call forward in phone mode:
1. Press Menu->Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press
Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
b) If you select Busy Forward:
1) Press
Forward field.
2) Enter the destination number you want to forward all incoming calls to
when the phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code or off code respectively in the
On Code or Off Code field.
88
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enabled from the Always
or , or the Switch soft key to select Enabled from the Busy