Before Starting The Mower; Delivery Checklist; Handlebar; Grassbag Assembly - Hayter Harrier 41 series Owner's Handbook Manual

ASSEMBLING THE MOWER BEFORE FIRST USE

Delivery Checklist

Remove the mower from the packaging and check that
the following items have been supplied correctly. If any
items are missing contact, your local Hayter dealer.
To prevent accidents cut off the long ribbon attached to
the grassbag and discard.
the battery for 14 hours. (Refer to battery charging)

Handlebar

allow the handlebar to pivot.
Hold the engine stop lever in towards the handlebar and
unfold the handlebar to the operating position, before
releasing.
Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not
become snagged at the pivot point.

Grassbag Assembly

dle is above the grassbag as shown. Attach plastic clips

Prevent Engine Damage

To prevent engine damage the engine is shipped
the correct grade of oil and petrol before starting the
engine.

Oil Type

oil. Never use additives with recommended oil.
To prolong the life of your engine it is important that
'Maintenance Schedule'.

Check Oil Level

the mower on a level surface, unscrew and remove the
and remove it to check the oil level.
2
1
B A
D
C
7
The oil level is correct when it is at the full mark on
the dipstick. DO NOT OVERFILL.
-

Fuel Type

Always use clean, fresh unleaded petrol. Purchase fuel
Stratton recommend the use of their fuel additive which
dealer.
Fill to base of neck to allow for fuel expansion. Do not
0.15
Litres