Table of Contents
Advertisement
2.3
connect the base Station
1
1.
Insert one end of the DC plug of the power adapter into the base station and the
other end into the wall outlet not controlled by a wall switch.
2.
Insert one end of the telephone line cord into the base station and the other end
into a telephone wall jack. If you have DSL high speed internet service, a DSL filter
(not included) is required.
NOTES
•
Always use the cables supplied with the product.
•
Use only the power adapter supplied with the base station.
•
Ensure power cord is fed through slot on base so unit sits flush with the desk.
•
The base station must be plugged into the power socket at all times. Do not
connect the telephone line until the handset is fully charged.
4
2
Advertisement
Table of Contents
