Table of Contents
Advertisement
2.5
Install and charge the Handset battery
1.
Place the supplied rechargeable battery in the battery compartment, with the
battery connector plugged in, as shown above.
2.
Slide the battery compartment cover back on until it clicks into place.
3.
Place the handset on the base to charge for at least 16 hours. When the handset
is fully charged the
the handset is properly placed on the base.
NOTES
•
Use only the supplied NiMH rechargeable battery.
•
If you do not use the handset for a long time, disconnect and remove the batteries
to prevent possible leakage.
will be displayed. The Charging LED lights up, indicating that
6
The charging
LED turns on.
DIGITAL HEADSET CORDLESS PHONE
Advertisement
Table of Contents
