Chain Dialing; To Access The Directory While On A Call; To Access The Call List While On A Call; To Access The Redial List While On A Call - VTech DS6475-2A User Manual

4.12

chain dialing

Use this feature to initiate a dialing sequence from the numbers in the directory, call list
or redial list while you are on a call. Chain dialing is useful when you wish to access
other numbers (such as bank account numbers or access codes) from the directory,
call list or redial list.

4.12.1 to Access the Directory While on a call

1. Press .
2. Press or to select Directory, then press
3. Press or to select the desired number, or press the dialing keys to start a
name search.
4. Press to dial the displayed number.

4.12.2 to Access the call List While on a call

1. Press .
2. Press or to select caller ID log, then press
3. Press or to select the desired number
4. Press to dial the displayed number.

4.12.3 to Access the redial List While on a call

1. Press reDIAL to access the redial list.
2. Press or or press reDIAL repeatedly to select the desired redial number.
3. Press to dial the displayed number.
NOTES
• You cannot edit, delete or save an entry while on a call, you can only review the
entries in the directory, call list or redial list.
• You cannot copy a call list entry into the directory while on a call.
• Press to exit the directory, call list or redial list while on a call.
4.13

redial the Last number

You can redial up to 10 of the last numbers called. If you have stored a name in the
directory to match with the number, the name will be displayed instead. The most
recently dialed number will display at the top of the redial list.

4.13.1 redial a number from the redial List

1. In idle mode, press reDIAL to access the redial list.
2. Press or or reDIAL repeatedly to select the desired redial number.
3. Press or
or
1. In idle mode, press
to dial the selected redial number.
or .
again.
again.
21