Front View
Back View
Step1. Remove the base
-Remove the screws as shown in Fig.3 & Fig.4
Fig.3
Step2. Remove the Front Bezel
-Open the cover and remove the one screw as shown in Fig.5, Fig.6
-Use the thin " " screw driver to open the clicks as shown
in Fig.7-9
Mechanical Instructions
Step3.Remove the Back cover
- Remove the screws and disconnect the connectors as shown in Fig.10 ,
Fig.11 Fig.12,Fig.13 then remove the AUDIO board, USB board and
control board
-Use the thin " " type screw driver to open the clicks as shown in Fig.10
Fig.4
Fig.5
Fig.6
13
190P6&170P6 LCD
Go to cover page
Fig.7
Fig.8
Fig9
Fig.10
Fig.11
Fig.12