Philips 190P6ES/00 Service Manual page 14

14 190P6&170P6 LCD
Go to cover page
Step4. Remove the Matel frame board
- Remove the screws and then remove the metal frame
as shown in Fig.15 Fig.14
Step 5. Remove the scaler and power board.
- Disconnect the connectors and remove unscrew the screws as shown
in Fig.15
- Remove the scaler and power board as shown in Fig.16 Fig.17
Mechanical Instruction
Fig.13
**************************************************************************************
Fig.14
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacement of backlight units is a correct way
when the defect is caused by backlight (CCFL, Lamp).
***************************************************************************************
Fig.15
Fig.16
Fig.17