Connection To Pc - Philips 190P6ES/00 Service Manual

Front view
UP and DOWN buttons are used when adjusting the OSD of your
monitor.
LEFT and RIGHT buttons, like the UP and DOWN buttons, are
also used in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow
buttons are pressed, the adjustment controls for the BRIGHTNESS
will show up.
VOLUME hotkey. When the LEFT and RIGHT arrow buttons are
VOLUME
pressed, the adjustment controls for VOLUME will show up.
OK button which when pressed will take you to the OSD controls
POWER button switches your monitor on.
Automatically adjust the horizontal position, vertical position,
phase and clock setting.
TM
LightFrame hotkey for mode-switching between full-screen mode
and multi-window mode.
USB Hub for versatile peripheral connections
Connecting to PC
1) Plug in the cables into connectors

Connection to PC

Note:
special Mac adapter to one end of the monitor signal cable
(2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the
back of your computer.
(c) Plug the power cord of your computer and your monitor into a
nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an
image, installation is complete.
If you use an Apple Macintosh, you need to connect the
7
190P6&170P6 LCD
Go to cover page