Electrical Instructions - Philips 190P6ES/00 Service Manual

20 190P6&170P6 LCD
Go to cover page
4.3 Adjustment of WHITE-D (B)
Apply a 1280*1024 / 60Hz signal with white pattern, set brightness
to 100%, and contrast to 50%. Adjust the R, G, B Sub-Gain, for the
screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall
be;
9300°K
0.283 ± 0.020
x (center)
0.297 ± 0.020
y (center)
Use Minolta CA-110 for color coordinates and luminance check.
Luminance is > 200 Nits in the center of the screen when
brightness is set to 100% and contrast is set to 50%.
4.4 Adjustment of sRGB
Apply a 1280*1024 / 60Hz signal with white pattern, set brightness
to 100%, and contrast to 50%. Adjust the R, G, B Sub-Gain,
for the screen center, the 1931 CIE chromaticity
(X, Y) co-ordinates shall be;
x(center)
y(center)
Ynits
4.5 EEPROM presetting (B)
After finishing all the adjustment, set:
Brightness to 100%
Contrast to 50%
OSD position at middle of screen
COLOR ADJUST to 6500K color temperature.
Stand-Alone set to Off
Smart Bright set to Off
Electrical instructions(190P6)
6500°K
0.313 ± 0.020
0.329 ± 0.020
sRGB
0.313 ± 0.020
0.329 ± 0.020
180 ± 10