Operation Screen - Safescan 2600 series User Manual

1. [ADD] button: Press this key to enter the Add function (Accumulative counting).
2. [SPD] button: Press this key to set counting speed (SP1= Low, SP2=Medium and SP3=High).
3. [MOD] button: Press this key to select a counting mode: MIX* / SORT / COUNT (*available for the
2665 & 2685 models).
4. Numeric keys [1-9] buttons: Press these keys to set a batch number (0-200).
5. [START] button: Press this key to start counting. Press and hold this key for 3 seconds to change and
select to Auto/Manual counting (not available for the 2610 model).
6. [UV] button: Press this key to (in)activate the UV detection.
7. [CLR] button: Press this key to clear the count memory.
8. [A/M] button: Press this key to switch between Auto/Manual counting.
9. [CUR] button: Press this key to select a currency.
10. [REP/PRT] button: Press this key to view/print the count result report (available for the
2665 & 2685 models).

1.3 Operation screen

2610
11. Add (cumulative counting) indication
12. Speed: High (SP3)/Medium (SP2)/Low (SP1)
13. Counting mode selection: Mix/Sort/Count
14. UV detection indication
2.0 OPERATION
Switch on the machine using the power switch on the back of the machine. At start up, the software version is
displayed. After displaying the software version, the machine will do a self-test. If the test finished successfully, the
machine is ready to operate (see picture below).
If any warning messages are displayed, please check table 4.1 for instructions to solve the problem.
2610
4
2660, 2665, 2685
15. Batch count number
16. Sheet count result
17. Currency: EUR, GBP, USD, PLN, SEK, NOK,
ALL
18. Value count result / total
2660, 2665, 2685