Removing The Drain Pump - Whirlpool GU2800XTV Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. Remove the access panel and toe panel
3. Remove the drain hose.
4. Disconnect the connector that secures
the wire leads to the drain pump by lifting
the locking tab and pulling the connector
out.

REMOVING THE DRAIN PUMP

Locking Tab
RAST Connector
5. Press the locking tab located behind the
drain pump.
Locking Tab
6. Rotate the drain pump 90 degrees counter
clockwise to remove it from the dishwasher.
7. Be sure to clean up any water that comes
out of the drain pump or drain hose.
4-9