REMOVING THE ACCESS
PANEL AND TOE PANEL
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dishwasher or disconnect power.
2.
Remove two screws that secure the
access panel and toe panel to the base
of the dishwasher.
3.
Pull both panels away from the
dishwasher.
Two screws
4.
Note the location of the tech sheet on the
back of the access panel.
REMOVING THE OPTICAL
1.
2.
3.
4.
5.
Tech Sheet
4-7
WATER INDICATOR
Unplug dishwasher or disconnect power.
Remove the access panel and toe panel.
Disconnect the wire connector to the
optical water indicator, or OWI, by lifting
the locking tab and removing the wire
connector.
Turn the OWI 90 degrees counter clockwise
and pull it out of the sump.
Be sure to clean up any water that comes
out of the drain pump or drain hose.
Optical Water Filter