Vent Circuit; Drain Motor Circuit; Diverter Valve Circuit - Whirlpool GU2800XTV Manual

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

VENT CIRCuIT

1. Place one probe on the P10 Pin 1 position
and the other on P10 Pin 3 position.
2. Should be between 600 Ω to 1800 Ω.
o

DRAIN MOTOR CIRCuIT

1. Place one probe on the P10 Pin 1 position
and the other on P10 Pin 6 position.
2. Should be between 15 Ω to 19 Ω.
WARNING
Electrical Shock Hazard
DETERGENT AND RINSE
AID CIRCuIT
1. Place one probe on the P10 Pin 1 position
and the other on P11 Pin 10 position.
2. Should be between 280 Ω to 340 Ω.

DIVERTER VALVE CIRCuIT

1. Place one probe on the P10 Pin 1 position
and the other on P12 Pin 6 position.
2. Should be between 1300 Ω to 1600 Ω.
5-2