Cleaning The Filter Screen; Drain Air Gap - Whirlpool ESTATE TUD5700EQ2 Use & Care Manual

Cleaning the Filter Screen

The filter system requires periodic cleaning as needed.
To clean screen
1. Unload the bottom rack. Slide the rack forward or
remove the rack to reach the filter screen.
2. Remove collected particles from the screen with your
fingers or a paper towel.
3. Replace the bottom rack with the rack bumpers facing
the door.
NOTE: Do not clean the dishwasher interior until it has
cooled.
16

Drain Air Gap

Check the drain air gap anytime your dishwasher
isn't draining well
Some state or local plumbing codes require the addition of
a drain air gap between a built-in dishwasher and the
home drain system. If a drain is clogged, the drain air gap
protects your dishwasher from water backing up into it.
The drain air gap is usually located on top of the sink or
countertop near the dishwasher. To order a drain air gap
contact your local dealer, or in the U.S.A., call the
Consumer Assistance Center at 1-800-253-1301 and ask
for Part Number 300096.
NOTE: The drain air gap is an external plumbing device
that is not part of your dishwasher. The warranty provided
with your dishwasher does not cover service costs directly
associated with the cleaning or repair of the external drain
air gap.
To clean the drain air gap
Clean the drain air gap periodically to ensure proper
drainage of your dishwasher. Follow the cleaning
instructions provided by the manufacturer. With most
types, you lift off the chrome cover. Unscrew the plastic
cap. Then check for any soil buildup. Clean if necessary.