System Menu - ADJ stinger ii User Instructions

Stinger II

System Menu

Stinger II System Menu
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MeNU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
ADDR -
DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until "ADDR" is
displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let select your desired DMX channel
mode.
1. Press the MENU button until "CHND" is displayed, press ENTER.
The current DMX channel mode will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel
mode and press ENTER to confim and exit.
SHND -
Show modes 0-7 (Factory programs).
1. Press the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between
0-7. Shows 1-7 are factory programs, while show "0" is random mode.
Use the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER, then press
and hold the MENU button for at least 3 seconds to activate. After
you have set your desired show, it can be changed at any time using
the UP or DOWN buttons.
ADJ Products, LLC - www.adj.com - Stinger II Instruction Manual Page 11 ADJ Products, LLC - www.adj.com - Stinger II Instruction Manual Page 12