ADJ stinger ii User Instructions page 5

Stinger II
Channel Value
1
0 - 9
10 - 44
45 - 79
80 - 114
115 - 149
150 - 184
185 - 219
220 - 255
2
0 - 247
248 - 255
Stinger II
Channel Value
1
0 - 9
10 - 44
45 - 79
80 - 114
115 - 149
150 - 184
185 - 219
220 - 255
2
0 - 9
10 - 198
199 - 225
226 - 255
3
0 - 9
10 - 244
245 - 255
ADJ Products, LLC - www.adj.com - Stinger II Instruction Manual Page 19
2 Channel Mode
Function
SHOW MODE
NO FUNCTION
SHOW 1
SHOW 2
SHOW 3
SHOW 4
SHOW 5
SHOW 6
RANDOM SHOW
SHOW SPEED/SOUND SENSE
SHOW SPEED SLOW - FAST
SOUND ACTIVE
9 Channel Mode
Function
SHOW MODE
NO FUNCTION
SHOW 1
SHOW 2
SHOW 3
SHOW 4
SHOW 5
SHOW 6
RANDOM SHOW
COLOR MACRO
NO FUNCTION
COLOR CHANGE
COLOR FADE 1
COLOR FADE 2
LED STROBE
NO STROBE
LED STROBE SLOW - FAST
SOUND ACTIVE STROBING
Stinger II
!
This device complies with 21 CFR
Subchapter J, or CFR 1040.10 and
Safety Issues: This unit may "pop" the fuse if the maximum allotted
load of 2 amps is reached.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short. Do not attempt to oper-
ate this unit if the power cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 21 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
ADJ Products, LLC - www.adj.com - Stinger II Instruction Manual Page 4
Safety Precautions
!
LASER RADIATION AVOID
DIRECT EYE EXPOSURE
Maximum output <5 mW
Wavelength: 405, 532nm
Class IIIa laser product
chapter I,
1040.11