System Menu - ADJ HYDRO BEAM X2 User Instructions

Hydro Beam X2

System Menu

SYSTEM MENU
The fixture includes an easy to navigate system menu control panel display where all necessary
settings and adjustments are made. (See image below) During normal operation, pressing the MENU
button once will access the fixture's main menu. Once in the main menu, you can navigate through the
different functions and access the sub-menus with the UP and DOWN buttons. When you reach a field
that requires adjusting, press the ENTER button to access that field and use the UP and DOWN buttons
to adjust the field. Pressing the ENTER button once more will confirm your setting. You may exit the
main menu at any time without making any adjustments by pressing the MENU button.
SYSTEM LOCK/UNLOCK: When the display lock function is activated, the display and system menu
will lock after 10 seconds of no activity. To UNLOCK the display, press and HOLD the MENU button for
10+ seconds.
While pressing the MENU button, a timer will appear at the bottom of the display indicating the pass-ing
seconds from 0-9. Once the timer reaches 9 seconds, the display will unlock allowing access to the
system menu.
DO NOT RELEASE THE MENU BUTTON UNTIL THE DISPLAY IS UNLOCKED.
If the MENU button is released before the timer reaches 9 seconds and/or is unlocked, the display will
not unlock and the time will be reset.
NOTE: The timer will not appear in the display if the lock function is disabled.
MENU
ENTER
ADJ Products, LLC - www.adj.com - Hydro Beam X2 User Manual Page
32