Grandstream Networks GXP-2000 User Manual page 34

GXP-2000 User Manual
Register
Expiration
Early Dial
Dial Plan Prefix
No Key Entry
Timeout
Use # as
Send Key
Local SIP port
Local RTP port
Use Random
Port
This parameter allows the user to specify the time frequency (in
minutes) the GXP-2000 refreshs its registration with the specified
registrar. The default interval is 60 minutes (or 1 hour). The
maximum interval is 65535 minutes (about 45 days).
Default is No. Use only if proxy supports 484 response
Sets the prefix added to each dialed number
Default is 4 seconds.
This parameter allows users to configure the "#" key to be used as the
"Send" (or "Dial") key. If set to "Yes", pressing this key will
immediately trigger the sending of dialed string collected so far. In
this case, this key is essentially equivalent to the "(Re)Dial" key. If
set to "No", this "#" key will then be included as part of the dial string
to be sent out.
This parameter defines the local SIP port the GXP-2000 will listen
and transmit. The default value for FXS port is 5060. The default
value for FXO port is 5062.
This parameter defines the local RTP-RTCP port pair the GXP-2000
will listen and transmit. It is the base RTP port for channel 0. When
configured, channel 0 will use this port _value for RTP and the
port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP
and port_value+3 for its RTCP. The default value for FXS port is
5004. The default value for FXO port is 5008.
This parameter, when set to Yes, will force random generation of both
the local SIP and RTP ports. This is usually necessary when multiple
GXP-2000s are behind the same NAT.
- 35 -
Grandstream Networks, Inc.