Sending Data To A Computer - Canon imagerunner advance 8205 Setup Manual

6
Specify the following settings → press [OK].
In this example, the following settings are specified:
[Name]: Original
<Protocol>: [Windows (SMB)]
[Host Name]: \\user-1\share
[User Name]: user_name
[Password]: password
• For [Host Name], enter <\\<name of your computer>\<name
of the shared folder>>.
• For [Folder Path], enter <\\<name of a folder inside the shared
folder>>. This can be omitted as necessary.
2
7
Press [Close].
8
Press [OK].

Sending Data to a Computer

Send a scanned original to the shared folder registered in
"Storing New Addresses, " on p. 37.
1
Place your originals.
2
Press [Address Book].
38
3
Select [Original] → press [OK].
4
Change the settings as necessary.
5
Press (Start).
If the <Original Size> screen is displayed, specify the size of the
original → press [OK].
6
Press [Start Sending].
The scanned original is sent to the shared folder.