Chapter 7 - Using The Power Box; Power Box Alerts; Turn The Buzzer On/Off; Enable/Disable The Automatic Operation - Robomow RC304 Original Operating Instructions

Chapter 7 – Using The Power Box

7.1 Power Box Alerts

Event
Docking Indicator is lit.
Operating Indicator is lit
Automatic Operation On/
OffIndicator is lit.
'PAUS' will be displayed on
the mower.
Wire Indicator – Flashes and
Beeps
All Indicators flash
All Indicators flash and Buzzer
sounds for 10 seconds.
Note – To stop an alert when sounding, press the On/Off Button.

7.2 Turn the Buzzer On/Off

• Press and hold the On/Off button for 10 seconds.
-
A short beep indicates On.
-
A flash indicates Off.

7.3 Enable/Disable the Automatic Operation

• This option is used to disable (pause) a predefined Automatic Operation (Program) of Robomow. This
option does not prevent Manual Operation (Section 6.3).
• Press and hold the Automatic Operation On/Off button for 2 seconds.
A red LED will be lit on the Power Box. 'PAUS' indication will be displayed on the mower:
o If Robomow is currently in the process of mowing:
- Robomow will complete the current mowing cycle.
- After completing the current mowing cycle, Robomow will stay in the Base Station and will not start
another mowing cycle.
• To Enable the Automatic Operation
o Press and hold the Program On/Off button for 2 seconds.
40
Description
The mower is in its Base Station.
The mower is not in its Base Station.
Automatic Operation is paused.
The Perimeter Wire is cut,
disconnected, or too long.
The mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
The Anti-Theft option is set to On,
and the mower was removed from
its Base Station when it was not
scheduled to operate.
Docking Indicator
Operating
Indicator
Automatic
Operation
Wire Indicator