Page 1
Quick start guide Possible Error Messages: Test Wire Position Add Pegs Chap. 5.2.6 Chap. 5.2.7 Adjust wire For RC / MC Models Press OK Follow Reference Set Cutting Height Chap. 5.1 Sharp Blade Cutting Height Indicator Safety Switch off OK to choose / approve selection Mowing with Edge / Mowing without Edge / Left arrow...
Page 2
Wire Setup Base Station Installation Chapter numbers mentioned in this Guide refer to the Operating & Safety Manual Carefully read and review all safety instructions, Finish Connect the Plot Connector Insert 2 Pegs warnings and cautions contained in the Chap. 4.5 Chap.