Panasonic TU-HDS20 Operating Instructions Manual page 68

ROttlER
GUIDE MENU OPERATIONS
Setup: Satellite Setup - Dish position
This screen allows you to correctly position your Satellite antenna by receiving
elevation, azimuth and rotation ( marked in degrees), after the you have entered your
5-digit zip code.
Dish position screen
Procedure
o
In Sat Setup menu, press
~
T buttons to highlight Dish Position. Dish Position sub menu
is displayed.
o
Press
~
button to enter your Zip code. Use the numeric keys on the Remote Control to
input your zip code numbers. Press" button to move to the next position.
o
Press ACTION button to enter the new zip code. Elevation, Azimuth and Tilt are
automatically displayed after you press the ACTION button.
o
This information should be used to properly align and position the satellite antenna. These
values are approximations. Proper alignment should also be verified by using the signal
strength meter.
g>