Step 3B. Digital Tv Reception With Dtv-Compatible Tv (Cable Service And Terrestrial Antenna) - Panasonic TU-HDS20 Operating Instructions Manual

GETTING
S'T
ARTED
Step 3b. Digital TV Reception with DTV-Compatible TV (Cable service and
terrestrial antenna)
Follow this diagram if you have a DTV-compatible TV, cable service and terrestrial
antenna.
Incoming cable signal
HDTV DIGITAL RECEIVER
nee
ALOIO TEL
(~'§)
LINE
NOTE: ANTENNA, AlB SWITCH AND
CABLE BOX CABLES NOT INCLUDED.
I
I
I
I
I
I
I
I
I
I
' - - -............:tF--........:tF--.....- ....-'
1_ -
PPt.!.°!l!!I_cil~l! ~C!x
_
I
SERIAL NO.
AC12OVGOHz
MAX AMPS
MANUFACTURED
MODEL NO.
SATELLITE RF OUT
o
IN
iCH30
DCH4
IN
o
HDTV DIGITAL RECEIVER WITH DTV-COMPATIBLE TV WITH CABLE
SERVICE AND TERRESTRIAL ANTENNA
Procedure
Connect the antenna cable to one input (A or B) of the AlB switch.
• Connect the incoming cable signal to the ANT IN of the cable box. Connect the ANT OUT
from the cable box to the other input (A or B) of the AlB switch.
• If not using a cable box, connect the cable to the other input of the AlB switch (not shown).
• Connect the HDTV Digital Receiver RF OUT jack to the DTV-compatible TV ANT (antenna)
IN jack using a RF cable.
Connect the component video outputs and audio output from the HDTV Digital Receiver to
the input jacks of the DTV-Compatible TV.
• Select the Video out mode according to the capability of your television.