Panasonic TU-HDS20 Operating Instructions Manual page 39

Gf1TING.
STARTED
Step 3e. Digital 8VSB Cable/Analog Cable with Conventional TV
Follow this diagram if you have a conventional TV, cable service providing 8VSB
digital cable cable box and you want to receive digital cable channels through the
HDTV Digital Receiver and analog cable channels through the cable box. Please take
note that the HDTV Digital Receiver can receive 8 VSB as well as the unscrambled
analog cable channels. Therefore, if you have no cable box, the 8 VSB cable can be
directly connected to the HDTV Digital Receiver.
Note: The HDTV Digital Receiver is able to receive DTV signals from your local cable
provider only if they are transmitted in the BVSB modulation format approved by the
FCC for DTV transmission. Also, your cable provider may elect to transmit in the
BVSB format for only
a
limited period of time. Please contact your cable provider to
determine if BVSB modulation is available
NOTE: ANTENNA, SPLITTER, CABLE BOX
AND VIDEO CABLES NOT INCLUDED
TV
AUDIO
R L
INPUT
0 10
(0
R-PUllOl
o
0
0 0
me
WSYNCL
R-AL00t.
-..1CE05-VlDEO DIGITAL
~=~=-+--~~=--1
AlDOCXJr laUN:
DIGITAL OUTPUT NTSC OUTPUT (.<>c-3)
=-=-===-=-=-=-:=-=-;
I
I
I
I
I
I
I
I
I
I
I
I
=_
=- __
=-:_~_::-:_~_:-=_=_-:.I_
J
8WBSG~ HrnwDGT~~CE~R
M:DB.NO.
Analog Signal
SAlEllJTE RF OUT
IN
0
IN
~~~O
o
DIGITAL 8 VSB CABLE/ANALOG CABLE WITH CONVENTIONAL TV
Procedure
• Connect the cable from the wall jack to the splitter using a standard RF cable with coaxial
connectors.
Connect one splitter output to the HDTV Digital Receiver ANT IN jack using a RF cable.
• If using a cable box, connect the other splitter output to the cable box ANT (antenna) IN
jack using a RF cable. Connect the cable box ANT (antenna) OUT jack to the TV ANT
(antenna) IN jack using a RF cable.
• If not using a cable box, connect the 8 VSB cable directly to the HDTV Digital Receiver.
• Follow directions in Getting Started section to connect the HDTV Digital Receiver to a
conventional TV.