Viewing Modes - Panasonic TU-HDS20 Operating Instructions Manual

FEA TURES
OF
THE
HDTV DIGITAL
RECEIVER
Icons: Channel Banner
The Channel Banner contains several icons that are displayed only when the feature
is available and is supported by the HDTV Digital Receiver. The following figure and
table depicts the location and appearance of these icons.
Icon Name
Icons Description Icon Appearance
Messages
Indicates that there is an unread
message.
•
Indicates that the channel is locked
Lock due to either limits on spending or
lie
by content advisory.
LOCI<
Alternate Audio
Indicates that the current program
•
has multiple audio tracks.
Closed Captioning
Indicates that the program has
Closed Captioning. CC
Dolby Digital indication
Indicates that the program has
D(J
Dolby Digital Audio.
Viewing Modes
This section describes the user interface that is directly controlled by remote or front
panel. The following operational modes are supported by this interface:
• Normal Viewing Mode (includes closed captioning)
Tuning Mode
• Recall Display Mode
Aspect Ratio Change Mode
Exiting Tuning Mode
Normal Viewing Mode
Normal Viewing Mode is defined as only the video being displayed and possibly
closed captioning data. When HDTV Digital Receiver is first powered on, it will be in
the Normal Viewing mode.
Note: The first time the
HDTV Digital Receiver
is powered On, all channels except those
exceeding the MPAA or TV rating limits and channels not authorized by the DIRECTV
are shown.
Once the user has created a favorite channel list, the HDTV Digital Receiver will
channel surf only to channels that are part of the favorite channel list. The user may
tune to a channel that is not a member of the favorite channel list by entering in a
channel number, explained in the Direct Tuning Method section. The user must add
this channel using the menu system.