Step 3C. Digital Tv Reception With Conventional Tv - Panasonic TU-HDS20 Operating Instructions Manual

GETTING STARTED
Step 3c. Digital TV/Cable Reception with Conventional TV
Follow this diagram if you have a conventional TV, cable service and terrestrial
antenna.
ASSEMBLED IN MEXICO
ae
AUVIO TEL LINE
()U:f
HDTV DIGITAL RECEIVER
NOTE: ANTENNA, NB SWITCH,
CABLE BOX, VI DEO AND S-VIDEO
CABLES NOT INCLUDED.
CONVENTIONAL TV or MONITOR
~---------------------I
I
~~
,
I R L VIDEO S ·VIDEO ,
: INPUT
~ ~
:
I '
o :
ANT IN I
I
DIGITAL OUTPUT
ANT
IN
ANT
OUT
CABLE BOX
r----------------
I
I
MOOELNO.
SERIAL NO.
AC 120VOOHz
MAX AMPS
MANUFACTURED
SATELLITE F l I ' U 1 r T - - - - - - - - -......
-;--t----thr=Pa==n=a=.o=n:;:i~:::;:;-------=::--I
o
IN
~CH
30
HOTVOIGITALRECel'IER
CH 4 R.AUDIO-
£
-~"o:i'~-
&
oLe
o
0
!!-SYNC-L
Incoming Cable signal
ANT
IN o
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV (CABLE
SERVICE AND TERRESTRIAL ANTENNA)
Procedure
Select 480i by using the Video Out button on the front of the HDTV Digital Receiver.
Connect the antenna cable to one of the inputs (A or B) of the AlB switch.
• If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with coaxial connector and connect the cable
box ANT (antenna) OUT jack to the other input (A or B) of the AlB switch.
If not using a cable box, connect the cable wire from the wall jack to the second input of the
AlB switch using an RF cable (not shown).
Connect the OUT signal of the AlB switch to the ANT IN jack of the HDTV Digital Receiver.
Connect the RF OUT jack to the Conventional TV or Monitor by suing a RF cable.
• Connect the NTSC OUTPUTS of the digital receiver to the AIV inputs of the television or
monitor.