Panasonic TU-HDS20 Operating Instructions Manual page 32

GETTING STARTED
Step 2a. HDTV Digital Receiver Connection to RGB Monitor
Follow this diagram when connecting the HDTV Digital Receiver to a Monitor with
RGB INPUTS.
ASSEII.B.ED IN tvEXlCO
NOTE: RGB cables
rot
included.
Panasonic®
HDTV DIGITAL RECEIVER
HD1V DIGITAL RECEIVER
RGB 1f\F'UTS
RGBMONTOR
r----+-----r--~ Pa-
y
R - a - a
0 0 0
000.81J
R-AUJl0-L V1CE05-VICEO DIGITAL
~;,"/:~+--=~=~---I
ALUlOOJT TB...UfIE
NTSC OUTPUT (/lC3)
SAlBlJ"fE
RF OJT
O
IN
iQ-i3
0
ANT IN
DQ-i4
o
,.....-tvOJEL-l\O.. . . . - ,
Terrestrial
ex
CaI::le Artema
HOTV DIGITAL RECEIVER CONNECTION TO RGB MONITOR
Procedure
• Connect video cables from the RGB output of the HDTV Digital Receiver to the RGB inputs
of your Monitor.
Connect the H,V output cables from HDTV Digital Receiver to the H,V inputs of your
Monitor.
• Set the RGBIYPSP
R
switch to the RGB position.
• Connect the audio cables from the left and right digital audio output jacks on the HDTV
Digital Receiver to the left and right digital audio jacks on the RGB monitor.
• Select the HDTV Digital Receiver video output according to the capability of your RGB
monitor (Hybrid, Native, 1080i or 720i).
Note: Modem should also be connected to
a
telephone jack using the supplied modem cable
if impulse pay per view services are desired.