User Set Mode - Icom IC-F9511HT Instruction Manual

y Push [CH Up] or [CH Down] to input the 'hour' data for
sleep time. After inputting, push [Clock] to set.
• The 'minutes' digit blinks.
S L E E P
0 8 : 3 5 P M
u Push [CH Up] or [CH Down] to input the 'minutes' data for
sleep time. After inputting, push [Clock] to set.
S L E E P
0 8 : 0 0 P M
i Push and hold [Clock] for 1 sec. to exit the clock set
mode.
• Return to the stand-by mode.
T I M E
T I M E
n User set mode
The user set mode is accessed with [User Set Mode] and
allows you to set seldom-changed settings. In this case you
can "customize" the transceiver operation to suit your prefer-
ences and operating style.
Entering the user set mode:
q While pushing and holding [P1] and [P2], push [
the power ON.
• Turn power OFF in advance.
• You should hold [P1] and [P2] until "SET MODE" appears on the
display.
[P1] [P2]
w Push and hold [P0] to enter user set mode.
[P0]
2
BASIC OPERATION
] to turn
[ ]
☞ Continues to the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
12