Remote Control; Using The Stationary Air Conditioner - Waeco CoolAir CA850S Operating Manual

Using the stationary air conditioner

5.3

Remote control

The remote control is equipped with the following control elements for
operating the system:
No. in fig. 3,
Meaning
page 4
1 STANDBY button
The system can be switched between active and standby
modes.
2 Temperature – button:
The temperature – button decreases the temperature by 1 °C or
the timer running time by 10 minutes.
3 Temperature + button:
The temperature + button increases the temperature by 1 °C or
the timer running time by 10 minutes.
4 Mode – button:
The operating mode – button switches to the next mode down.
5 Mode + button:
The operating mode + button switches to the next mode up.
6 Using the stationary air conditioner
Caution
a
The manufacturer assumes no liability for non-observance of this
operating manual, in particular for any consequential damage,
especially consequential damage caused by failure of the station-
ary air conditioner.
Caution
a
Do not insert foreign objects into the system.
28
EN