Table of Contents
Advertisement
31
Need Help ? Bayer Diabetes Care Helpline: 1-800-268-7200
Using the Memory:
With the meter off, press the M
button on the meter to view stored
test results.
The 14 day average will appear
on the display with the average for
test results taken over the last 14
days. If you have set an alarm that
has not sounded yet, you will also
see a
symbol.
Number of results: The number
of results included in the average
is shown at the top of the display.
Your control results are not included
in this 14 day average.
Press ▲ to view the 7 day total.
7 day total: Your meter will display
the total number of results taken
during the last seven days.
High and low results: At the top of
the display you will see the number
of high results (above 10.0 mmol/L)
and low results (below 4.0 mmol/L)
during that seven day period.
Press M to review previous
results.
Previous results: Results will be
shown starting with the most
recent. Each result will show the
date and time the test was taken,
as well as any symbols you chose
to mark the test result.
You can press ▲ or ▼ to scroll
forward or backward through
the results. You can press and
release the button to view stored
results one at a time or you can
hold it to move through results
continuously.
When
appears
on
display, you have viewed all of the
results in the memory.
The meter will hold 480 results in
the memory. When the maximum
is reached, the oldest test result
will be removed as a new test
is completed and saved to the
memory.
Press M to turn the meter off, or
it will automatically turn off after
three minutes.
www.bayerdiabetes.ca
the
32
Advertisement
Table of Contents
