Table of Contents
Advertisement
1.
Using the external Wifi adapter
2.
Using the external ETH/USB adapter
3.
Directly over the Ethernet interface
Fig. 5.2: Connecting to a PC over ETH and over WiFi or ETH/USB adapter
1.
PC connected via Wifi adapter
We recommend using the "W1" - external Wifi adapter (an optional accessory of the RipEX).
Connect your PC or tablet or smart phone to RipEX Wifi AP first. Its default SSID is "RipEX + Unit
name + S/N". The W1 contains a built-in DHCP server, so if you have a DHCP client in your PC
(as most users do), you don't need to set anything up. The RipEX's IP address for access over
the ETH/USB adapter is fixed: 10.9.8.7.
Go to 4 Login to RipEX
2.
PC connected via ETH/USB adapter
We recommend using the "X5" - external ETH/USB adapter (an optional accessory of the RipEX).
The ETH/USB contains a built-in DHCP server, so if you have a DHCP client in your PC as most
users, you don't need to set anything up. The RipEX's IP address for access over the ETH/USB
adapter is fixed: 10.9.8.7.
Go to 4 Login to RipEX
3.
PC connected directly to ETH port
Set a static IP address in PC, example for Windows XP:
© RACOM s.r.o. – RipEX Radio modem & Router
https://10.9.8.7
PC DHCP
https://10.9.8.7
PC DHCP
Bench test
https://192.168.169.169
PC 192.168.169.250
75
Advertisement
Table of Contents
