Table of Contents
Advertisement
Statistic
Fig. 7.11: Menu Statistic
Statistic log provides information about communication on all interfaces: Radio, ETH, COM1, COM2
and ETH Protocols (Modus TCP, Terminal servers, TCP proxy). VLAN packets are part of ETH.
Balloon tips provide on line help for all column names. These tips explain the meanings and the way
of calculation of individual values.
Meaning of IP addresses listed:
Rx - for received (Rx) packets, the IP source address from UDP header is displayed. Values in DATA
part of the table are calculated for this source IP (origin), values in RADIO PROTOCOL part are for the
last radio hop.
Tx - for transmitted (Tx) packets, the IP destination address from UDP header is displayed. Values in
DATA part of the table are calculated for this destination IP (final destination), values in RADIO PRO-
TOCOL part are for the next radio hop.
Note
1.
Remember that the IP source and IP destination addresses of user IP packets are not
the IP addresses of RipEXes who transport them.
2.
ETH Protocol packets for TCP proxy are counted on "TCP socket", i.e. between RipEX
Ethernet and Host device. Rx from Host device to RipEX, Tx from RipEX to Host.
© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration
135
Advertisement
Table of Contents
