Revision History - RACOM RipEX User Manual

Appendix C. Revision History
Revision
This manual was prepared to cover a specific version of firmware code. Accordingly, some screens
and features may differ from the actual unit you are working with. While every reasonable effort has
been made to ensure the accuracy of this publication, product improvements may also result in minor
differences between the manual and the product shipped to you.
Revision 1.1
First issue
Revision 1.2
PoE is not supported in RipEX from 1.1.2012, so all information about PoE has been removed
Revision 1.3
Added information about Monitoring Upgraded information about Terminal servers (IP port dynamical
changes support)
New serial SCADA protocols - RP570, C24 Melsec, ITT Flygt, Cactus
Revision 1.4
Added information about RipEX-HS, Hot Standby unit.
Upgraded chapters: Technical specification, Model offerings, Accessories, Safety distance, Advanced
Configuration
Revision 1.5
Added information about new features: Backup routes, TCP proxy, ARP proxy& VLAN, FW and SW
keys upgrade via USB, SLIP and Siemens 3964(R) SCADA protocols
Upgraded chapters: Important Notice, Key Features, Bridge mode, Firmware update and upgrade,
Technical specification, Model offerings, Accessories, Warranty, Advanced Configuration
Revision 1.6
Added information about new features: 50 kHz channel spacing, Wifi management, L2 firewall, Flash
disc – unit configuration, ssl certificate.
Upgraded chapters: Getting started, Key Features, RipEX in detail, Product, Bench test, Technical
specification, Model offerings, Accessories, Advanced Configuration
Revision 1.7
Added information about Country of Origin
Added chapter: Country of Origin
© RACOM s.r.o. – RipEX Radio modem & Router
2011-08-31
2011-12-31
2011-01-26
2012-07-11
2013-04-29
2014-02-17
2014-02-17

Revision History

173