Accessories; Ripex-Hs; Ripex-Hs Dimensions; Adapter Eth/Usb - RACOM RipEX User Manual

Product

4.6. Accessories

1. RipEX Hot Standby
RipEX-HS is redundant hot standby chassis. There are two hot-stand-by standard RipEX units
inside. In case of a detection of failure, automatic switchover between RipEX units sis performed.
RipEX-HS is suitable for Central sites, Repeaters or Important remote sites where no single point
of failure is required.
Fig. 4.16: RipEX-HS
Fig. 4.17: RipeX-HS dimensions
For more information see RipEX-HS datasheet or User manual on www.racom.eu
2. ETH/USB adapter
ETH/USB adapter for service access to the web interface
via USB connector. Includes a built-in DHCP server which
provides up to 5 leases. To access the RipEX always use
the fixed IP 10.9.8.7. For details on use see Section 5.3,
"Connecting RipEX to a programming PC".
1
http://www.racom.eu
66
Fig. 4.18: Adapter ETH/USB
RipEX Radio modem & Router – © RACOM s.r.o.
1
.