Under no circumstances is RACOM or any other company or person responsible for incidental, accidental or related damage arising as a result of the use of this product. RACOM does not provide the user with any form of guarantee containing assurance of the suitability and applicability for its application.
2.7. Firmware update and upgrade Occasionally RipEX firmware update or upgrade is released. An update improves functionality and/or fix software bugs. Updates can be downloaded for free from www.racom.eu A firmware upgrade implements significant improvements and new functions which take the product to a new level.
Page 64
26 dB, rel- ative to a given and predetermined zero dB level. Please contact RACOM for current status of official test reports for CE, FCC and other standards for different models (frequencies) and different channel spacings.
Fig. 4.16: RipEX-HS Fig. 4.17: RipeX-HS dimensions For more information see RipEX-HS datasheet or User manual on www.racom.eu ETH/USB adapter ETH/USB adapter for service access to the web interface via USB connector. Includes a built-in DHCP server which provides up to 5 leases.
The certificate is signed by the certification authority Racom s.r.o. It meets all security regulations and you need not be concerned about importing it into your computer. Confirm the import with all warnings and exceptions that your browser may display during installation.
Comand Line Interface is accessible via the SSH protocol. If “Off”, CLI is inaccessible. The SSH keys are unique for each individual RipEX Serial number. The public key is downloaded in RipEX, for the private key kindly contact RACOM and provide the RipEX S/N. ○ SSH Port Default = 22 Just for information, can not be changed.
Page 131
This subnet can not overlap with any other subnet in RipEX defined on Radio, ETH or VLAN. UNI is the "Universal" protocol utility designed by RACOM. It is supposed to be used when the applic- ation protocol is not in the RipEX list and the addressed mode of communication is preferable in the network (which is a typical scenario).
Page 144
The length of user data, the range from 8 to 4096 Byte. Some overhead to this Length is always added like these: ICMP - 28 bytes RSS - 43 bytes for IP+UDP+RACOM header + 8 bytes (Trace-RSS and DQ) per each radio hop + 4 bytes (marking in server) RSS ping can not be longer than 3/4 MTU.
Page 145
:56/209[RSS/DQ]-->10.10.10.243:51/225[RSS/DQ]-- >192.168.131.243" "192.168.131.243-->10.10.10.242 :46/214[RSS/DQ]-->10.10.10.241 :57/213[RSS/DQ]-- >10.10.10.241" 131 bytes = RSS packet size (RACOM header + data + trace) 10.10.10.242 = repeater IP 192.168.131.243 = destination IP seq = ping sequence number rtt = round trip time, the time from transmission to reception •...
Master key. There are two ways to input the SW key into RipEX: Fill in the key you have received from RACOM or your distributor in the Key box using copy/paste or the SW key can be uploaded from a file. Fill in the SW Key file, or browse your disk in order to find the file.
Page 156
Note: New firmware as well as SW feature keys can be uploaded directly from a USB flash disk. Only FAT32 file system on flash disk is supported. Download firmware file from www.racom.eu. Save this file without any change (name) in the root directory of USB flash. When SW key(s) will be uploaded, save the respective file(s) also in the root directory with the file name(s) unchanged.
Fig. 7.20: Menu Maintenance Configuration Technical support package is the file where some internal events are recorded. It can be used by RACOM technical support when a deeper diagnostic is required. The most recent part of it can be downloaded to the local PC.
Keys are unique for each individual RipEX Serial number. Private key is downloaded in RipEX, for public key kindly contact RACOM and provide RipEX S/N. Connecting with a putty client. Type the following command into the window Host Name (or IP address): admin@192.168.169.169...
The WEEE Directive concerns the recovery, reuse, and recycling of electronic and electrical equipment. Under the Directive, used equipment must be marked, collected separately, and disposed of properly. Racom has instigated a programme to manage the reuse, recycling, and recovery of waste in an environmentally safe manner using processes that comply with the WEEE Directive (EU Waste Electrical and Electronic Equipment 2002/96/EC).
Only undermentioned manufacturer is entitled to repair any devices. 10.7. Important Notifications Sole owner of all rights to this operating manual is the company RACOM s. r. o. (further in this manual referred to under the abbreviated name RACOM). All rights reserved. Drawing written, printed or repro- duced copies of this manual or records on various media or translation of any part of this manual to foreign languages (without written consent of the rights owner) is prohibited.
Safety, environment, licensing The program (binary version) is available for free on the contacts listed on http://www.racom.eu. This product contains open source or another software originating from third parties subject to GNU General Public License (GPL), GNU Library / Lesser General Public License (LGPL) and / or further author li- cences, declarations of responsibility exclusion and notifications.
Nove Mesto na Morave, 25 of February 2015 Jiri Hruska, CEO RACOM s.r.o. • Mirova 1283 • 592 31 Nove Mesto na Morave • Czech Republic www.racom.eu Tel.: +420 565 659 511 • Fax: +420 565 659 512 • E-mail: racom@racom.eu ver.
Nove Mesto na Morave, 25 of April 2015 Jiri Hruska, CEO RACOM s.r.o. • Mirova 1283 • 592 31 Nove Mesto na Morave • Czech Republic www.racom.eu Tel.: +420 565 659 511 • Fax: +420 565 659 512 • E-mail: racom@racom.eu ver.
The serviced equipment shall be returned by RACOM to the customer by prepaid freight. If circumstances do not permit the equipment to be returned to RACOM, then the customer is liable and agrees to reim- burse RACOM for expenses incurred by RACOM during servicing the equipment on site. When equipment does not qualify for servicing under warranty, RACOM shall charge the customer and be reimbursed for costs incurred for parts and labour at prevailing rates.