Outbound Filter - D-Link DWR-161 User Manual

Pocket router

Table of Contents

Section 3 - Configuration

Outbound Filter enables you to control what packets are allowed to pass the router. Outbound Filter applies on all outbound packets.

Outbound Filter:

Use Schedule Rule:

Copy to ID:

ID:

Source IP: Ports:

Destination IP: Ports:

Enable:

Schedule Rule #:

D-Link DWR-161 User Manual

Outbound Filter

OUTBOUND FILTER SETTING

Select this box to Enable the filter.

You may select Always On or

choose the number of a schedule

rule that you have defined.

Copies the predefined filter to the

specified ID.

OUTBOUND FILTER RULES LIST

Identifies the filter.

Specify the local IP address and then

specify the port after the colon.

Specify the remote IP address and

then the port after the colon.

Select this box to enable the filter.

Specify the schedule rule number.

Go back to the previous filter page.

Advance to the next filter page.

Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.

Table of Contents