Outbound Filter - D-Link DSL-321B User Manual

Section 3 - Configuration

OUTBOUND FILTER

By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect.
ADD OUTBOUND IP FILTER
Type the filter name on the Filter Name.
Choose TCP, UDP or ICMP on the Protocol.
Type Source IP address, Source Subnet Mask
and Source Port
Type Destination IP address, Destination Subnet
Mask and Destination Port
Please click Add/Apply button to add the policy in
the list.
D-Link DSL-321B User Manual 37