Outbound Filter - D-Link DWR-961 User Manual

Section 4 - Configuration
Outbound Filter enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound packets.

Outbound Filter:

Select this box to Enable outbound filtering.
Use Schedule Rule: Select a schedule to use and copy to the specified rule ID when
you click the Copy to button. You may select Always On or use
a specific schedule that you have defined. To create and edit
schedules, please refer to Schedules on page 59.
OUTBOUND FILTER RULES LIST
Here, you can select whether to Allow or Deny all outgoing traffic
except for traffic that matches the listed rules.
ID: This identifies the rule.
Source IP : Ports: Specify the local IP address and then specify the port after the
colon.
Destination IP :
Ports: Specify the remote IP address and then the port after the colon.
Enable: Check the box to enable the specified rule.
Schedule Rule #: Specify the schedule rule number. Click on the Add New Rule
button to create a new schedule rule.
Previous Page: Go back to the previous filter page.
Next Page: Advance to the next filter page.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-9 User Manual
Outbound Filter
49