Table of Contents
Advertisement
Section 3 - Configuration
OUTBOUND FILTER
By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by
specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect.
To access the OUTBOUND FILTER settings window, click on the OUTBOUND FILTER button in the ADVANCED tab
ADD OUTBOUND IP FILTER
Type the filter name on the Filter Name.
Choose ICMP, TCP/UDP, TCP or UDP on the Protocol.
Type Source IP address, Source Subnet Mask and Source Port(port
or port::port means from which port to which port)
Type Destination IP address, Destination Subnet Mask and
Destination Port(port or port::port means from which port to which port)
Set the policy schedule on the Schedule, Always or never, or View
Available Schedules
Please click Add/Apply button to add the policy in the list.
D-Link DSL-2751 User Manual
62
Advertisement
Table of Contents
