Network Setup - D-Link DCS-6314 User Manual

Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
LAN Settings: This section lets you configure settings for your
local area network.
DHCP: Select this connection if you have a DHCP server
running on your network and would like your
camera to obtain an IP address automatically.
Static IP Client: You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera.
Enter the fixed IP address in this field.
IP Address:
Subnet Mask: This number is used to determine if the destination is
in the same subnet. The default value is 255.255.255.0.
Default Router: The router (gateway) used to forward frames to
destinations in a different subnet. Invalid gateway
settings may cause the failure of transmissions to a
different subnet.
Primary DNS: The primary domain name server (DNS) translates
names to IP addresses.
Secondary The secondary DNS acts as a backup to the primary.
DNS:
Enable UPnP Enabling this setting allows your camera to be
Presentation: configured as a UPnP device on your network.
Enable Enabling this setting allows the camera to add port
UPnP Port forwarding entries into the router automatically on
Forwarding: a UPnP capable network.
D-Link DCS-6314 User Manual

Network Setup

40